Elimination Method Example 15
This elimination method is simply a summary of elimination methods 1 to 14. Here we are going to provide a practical example using elimination methods 1 to 14.
We need to reduce the size of our dictionary so it can match our parent's dictionary. We need to do that so we can be self-sufficient where we don't have to depend on our parent to help us correct our communication. By doing so, we can correct our own communication. Here as an example, our dictionary contains 70 words, where 20 of them are bad words or negative words. In this case, we represent \(N\) as the number of good words and \(M\) as the number of bad words where:
From that we can represent our dictionary in the form below:
From above, our dictionary has 2 sets of words — one set is good words and the other set is bad words. Here, we can represent the set of good words as \(D(\hat{w})\) and the set of bad words as \(D(\bar{w})\) where they are represented in the form below.
Since we no longer need the set of bad words in our dictionary, we simply eliminate them by setting them equal to zero. Setting them equal to zero means we simply cross them out.
That gives us
We can also cross them out in the form below
Now, we have what we need. We have a set of positive words in our dictionary only:
Now, let's apply the technique from Elimination Method 2 to further reduce the size of our dictionary. From Elimination Method 2, we have learned that if two or more words can be combined to form another word or a new word, the new word or the other word may not be needed. In this case, let's assume that we have 3 words that can be combined with another 3 words to form 3 new words. For instance, we have \(\hat{w}_1\), \(\hat{w}_2\), and \(\hat{w}_3\) that can be combined with \(\hat{w}_4\), \(\hat{w}_5\), and \(\hat{w}_6\) to form \(\hat{w}_{48}\), \(\hat{w}_{49}\), and \(\hat{w}_{50}\). We can represent them in the form below:
By using this approach, \(\hat{w}_{48}\), \(\hat{w}_{49}\), and \(\hat{w}_{50}\) are no longer needed in \(D(\hat{w})\). By eliminating them from our dictionary, we have:
This approach further reduces the size of our dictionary. As we can see, we start with 70 words, now we are down to 47.
Now, let's apply the approach from Elimination Method 3. From the approach number 3, we have learned that if a word exists in our dictionary and it is confused or causes a lot of confusion, it can then be replaced by another word. From our dictionary we have:
Let's assume that the usage of \(\hat{w}_{46}\) and \(\hat{w}_7\) has caused a lot of confusion, they can then be removed from our dictionary. By removing them, we further reduced the size of our dictionary as shown below.
The way to look at it, when we use those two words, they make people confused or create ambiguity in our communication. Since we already have words in our dictionary that can be used to remove that confusion, we simply remove those two words and use the existing words. Doing so makes our communication more portable and further reduces the size of our dictionary.
Another way to look at it, since communication about Entity 1 points to Entity 1, in this case, the communication about Entity 1 can be viewed as a group of sentences which is a collection of words, where all those words belong to the dictionary. Now, since \(\hat{w}_{46}\) and \(\hat{w}_7\) create confusion in the communication about Entity 1, in this case using those two words does not enable communication about Entity 1 to point to Entity 1. In this case, those two words can simply be removed from communication about Entity 1. When we do that, we simply remove them from our dictionary which makes our dictionary more portable.
From the approach in Elimination Method 4, we have learned that: If a word or the definition of a word is already defined or implemented in another word or a group of words, then the usage of that word can be dropped.
From our dictionary, we have:
Let's assume that we have \(\hat{w}_{43}\), \(\hat{w}_{44}\), and \(\hat{w}_{45}\) that are already defined in other words, where those words have been misused. But when the other words are used, there is no problem. In this case, we can simply remove them from our dictionary to prevent the misuse. Removing them from our dictionary prevents the misuse. It also reduces the size of our dictionary and makes our communication more portable.
Now, let's use the approach from Elimination Method 5. If the structure of a word is already included in another word or a combination of words, then that word can be dropped; especially if that word has been misused or misinterpreted or misunderstood.
From the approach above, let's assume that the structure of \(\hat{w}_{41}\) and \(\hat{w}_{42}\) is already implemented in \(\hat{w}_2\) and \(\hat{w}_3\) where \(\hat{w}_{41}\) and \(\hat{w}_{42}\) have been misused. In this case, we can simply drop them in our dictionary. By dropping them from our dictionary, we have:
As shown above, since the two words have been misused and the structures of both words are already implemented in other words, there is no need to use them since they have been misused. In this case, we can simply remove them from our dictionary and use the existing words that have not been misused. Doing so reduces the size of our dictionary and also makes it more portable.
Now, let's look at the approach of Elimination Method 7: If a word exists and it does not identify an actual entity, then that word can be removed from our dictionary. From our dictionary we have:
Let's assume that \(\hat{w}_{38}\), \(\hat{w}_{39}\), and \(\hat{w}_{40}\) exist in \(D(\hat{w})\) but do not point or identify any entity. For example:
As shown above, those words do not point to actual entities. In this case, we can simply remove them from our dictionary because they serve us no purpose. They are simply using more space in our dictionary to make it less portable. By removing them from our dictionary, our dictionary becomes more compact and more portable.
Now, let's take a look at the approach in Elimination Method 8. If the structure of a word does not exist or the structure of a word does not exist in another word or in a combination of other words, that word can be removed in our dictionary.
Let's assume that from our dictionary above, we have \(\hat{w}_{36}\) and \(\hat{w}_{37}\). Those two words should point to two entities. The fact that the structures of those two words do not exist or do not exist in a combination of words, they simply serve no purpose in our dictionary. We can also say that those words have no structure, because they don't point to any entity. They serve us no purpose because we cannot use them in our communication or communicate properly with them since they identify no entity. In this case, we can simply drop them from our dictionary. By removing them from our dictionary, that makes our dictionary more compact and portable.
Let's take a look at the approach from Elimination Method 9. If the usage of a word develops problems or may develop problems, where the solution is another word or the opposite word, that word can be removed or replaced by the opposite word.
We have the following words in our dictionary:
If the usage of \(\hat{w}_{35}\) develops problems or where \(\hat{w}_{34}\) is viewed as the solution for that problem. In this case, \(\hat{w}_{35}\) can be dropped from our dictionary and use \(\hat{w}_{34}\) instead, which is the solution of the problem. The way to look at it, a problem is developed because of the usage of a word; the opposite word which is viewed as the solution can be used instead. For instance, \(\hat{w}_{34} \rightarrow E_{34}\) where \(E_{34}\) is viewed as the solution entity for the identified problem. Now, \(\hat{w}_{35} \rightarrow E_{35}\), but \(E_{35}\) only exists when \(\hat{w}_{35}\) is used. In this case, it makes sense for us to drop \(\hat{w}_{35}\) from \(D(\hat{w})\) to prevent the development of that problem. In other words, the problem only exists when the word is used. To solve that problem, we can simply drop that word from our dictionary and use the solution word instead. When we do that, we further reduce the size of our dictionary and make our communication more portable.
Now, let's look at the approach of Elimination Method 10. If a word exists where it was intended to solve a problem, then it failed. If that problem solution exists in another word or in combination of words or structure in other word(s), then that word can be dropped from our dictionary.
In our dictionary we have:
If \(\hat{w}_{34}\) exists in \(D(\hat{w})\) where it was intended to solve a problem, then it failed. If that problem solution exists in \(\hat{w}_{33}\) or in combination of \(\hat{w}_{32} + \hat{w}_{33}\) or in the structure of any of them, then we can drop \(\hat{w}_{34}\) and use \(\hat{w}_{33}\) or the combination of \(\hat{w}_{32} + \hat{w}_{33}\). The way to look at it, that word is supposed to be the solution of a problem, but fails to solve that problem, then another word that is viewed as the solution for the actual problem can be used instead. Another way to look at it, a problem is identified where \(\hat{w}_{34}\) supposes to point to \(E_{34}\) which is viewed as the solution for the problem. But \(E_{34}\) is not the actual solution for that problem, because it fails to solve it, while \(\hat{w}_{33}\) exists in the form of \(\hat{w}_{33} \rightarrow E_{33}\) where \(E_{33}\) is viewed as the solution for the actual problem. In this case, there is no need in our dictionary for \(\hat{w}_{34}\). Another way to look at it:
In this case, we simply remove \(\hat{w}_{34}\) from \(D(\hat{w})\), because it does not point to an actual entity. Now since the word that intended to solve the problem fails, it does not point to an actual entity or an actual solution. The actual word that solves the problem is the one that points to the actual solution for that problem. In this case, the intended word can be removed from our dictionary. When we do that, we further reduce the size of our dictionary and make our communication more portable.
Let's look at the approach of Elimination Method 11. If a word exists in the dictionary and it is misinterpreted and misunderstood, it can then be replaced by an existing word that is well understood and well interpreted.
Assume that in our dictionary we have:
Now, if \(\hat{w}_{32}\) and \(\hat{w}_{33}\) have been misinterpreted and misunderstood where \(\hat{w}_{30}\) and \(\hat{w}_{31}\) are well understood and well interpreted, then we can drop \(\hat{w}_{32}\) and \(\hat{w}_{33}\) in \(D(\hat{w})\) and use \(\hat{w}_{30}\) and \(\hat{w}_{31}\). The way to look at it:
But when we use \(\hat{w}_{32}\) and \(\hat{w}_{33}\) in our communication, they are viewed in the form of:
The way to look at it, those words are supposed to point to the same entities. But when they are used, they do not point to the same entities, because they have been misunderstood and misinterpreted. Therefore, they can be dropped from our dictionary and use the existing words in our dictionary that are well understood and well interpreted. As pointed out above, those words still point to the same entity. When we do that, we further reduce the size of our dictionary and make our communication more portable.
From the approach of Elimination Method 12, we have: If a word exists in our dictionary and it identifies wrong entity, it can then be removed from our dictionary.
From our dictionary we have:
Let's assume that \(\hat{w}_{31}\) identifies wrong entity, in this case we have:
From above, it shows that Word 30 identifies Entity 30, but Word 31 wrongly identifies Entity 30. This is the same as saying that, an actual word points to an actual entity. Another word wrongly points to the actual entity. In this case, we can remove the other word from our dictionary since we already have a word that points to the actual entity. When we do that, we further reduce the size of our dictionary and make our communication more portable.
Now, let's take a look at the approach of Elimination Method 13. If a word refers to a group where that word has been misunderstood, use the actual word in the group rather than the word itself.
In our dictionary we have:
If \(\hat{w}_{30}\) refers to a group of words and \(\hat{w}_{30}\) has been misunderstood or misinterpreted, we can use a specific word in the group rather than using \(\hat{w}_{30}\). Now, if \(\hat{w}_{30}\) only exists in our dictionary for that purpose, we can simply drop it from our dictionary. When we do that, that further reduces the size of our dictionary and makes our communication more portable.
Now, that we have reduced the size of our dictionary by applying all the approaches identified from the elimination methods. After doing so, we have reduced the size of our dictionary to:
As shown above, the size of our dictionary has been reduced to 29 words. Let's assume that after applying all the techniques above, we have identified 4 words in our dictionary that do not identify actual entities. In other words, using visual aspect of communication, there are 4 words in our dictionary that do not identify any entity. Those 4 words are: \(\hat{w}_{26}\), \(\hat{w}_{27}\), \(\hat{w}_{28}\), and \(\hat{w}_{29}\). The way to look at it, the 4 words identified here are in the dictionary, but they do not identify any entity, for example we have:
As shown above, while the other words in our dictionary point to actual entities, the 4 words identified do not point to actual entities. In this case, we can say that they point nowhere. They simply occupy more space in our dictionary. By removing them from our dictionary, we simply shrink the size of our dictionary to make it more compact and portable. Removing them from our dictionary simply reduces the size of our dictionary to just 25 words as shown below.
As we can see, we start at \(N = 70\). By removing all negative words from our dictionary, we reduce \(N = 50\). By applying all the techniques identified, we further reduce \(N = 25\). In this case, we decrease the size of our dictionary to almost \(\dfrac{1}{3}\).
Some other approaches that are good to know may not further reduce the size of our dictionary but will improve our communication. If \(\hat{w}_1 \rightarrow E_1\) and \(\hat{w}_2 \not\rightarrow E_1\), then we use \(\hat{w}_1\) to communicate about \(E_1\) instead of \(E_2\).
If \(\hat{w}_1 + \hat{w}_2\) do not point to an entity, then we do not use it in our communication. This is the same as saying that if a term or an expression exists and it does not point to an actual entity, then we cannot use it in our communication.
Explore More in Natural Dictionary
Practice word elimination and explore the full dictionary in our interactive app.
Open Natural Dictionary App