Elimination Method Example 15

This elimination method is simply a summary of elimination methods 1 to 14. Here we are going to provide a practical example using elimination methods 1–14.

We need to reduce the size of our dictionary so it matches our parent's dictionary. We need to do that so we can be self-sufficient where we don't have to depend on our parent to help us correct our communication. By doing so, we can correct our own communication. Here as an example, we have our dictionary that contains 70 words, where 20 of them are bad or negative words. In this case, we represent our dictionary below to show both the group of good words and the group of bad words.

Our Dictionary
Good Words Bad Words
Word 1
Word 2
Word 3
Word 4
Word 5
Word 6
Word 7
Word 8
…
Word 50
Word 51
Word 52
Word 53
Word 54
Word 55
Word 56
Word 57
Word 58
…
Word 70

The table above represents our dictionary which contains both good words and bad words. We group both the good words and bad words to represent them. We use the triple periods to show continuity of words because of insufficient space. From the table above, Word 1 can also be identified as Good Word 1, while Word 51 can also be identified as Bad Word 51. Since we title them as both good words and bad words, that is sufficient.

Since we no longer need the set of bad words in our dictionary, we simply eliminate them by deleting them from our dictionary. In this case, our dictionary is represented below with only the set of good words.

Our Dictionary
Good Words
Word 1
Word 2
Word 3
Word 4
Word 5
Word 6
Word 7
Word 8
…
Word 50

Since now we only have good words in our dictionary, we can simply represent our dictionary above without using the good words title.

Our Dictionary
Word 1
Word 2
Word 3
Word 4
Word 5
Word 6
Word 7
Word 8
…
Word 50

Now, let's apply the technique from Elimination Method 2 to further reduce the size of our dictionary. From Elimination Method 2, we have learned that if two or more words can be combined to form another word or a new word, the new word or the other word may not be needed. In this case, let's assume that we have 3 words that can be combined with another 3 words to form 3 new words. For instance, we have Word 1, Word 2, and Word 3 that can be combined with Word 4, Word 5, and Word 6 to form Word 48, Word 49, and Word 50. We can represent them in the form below:

word 48
Word 1
Word 4
word 49
Word 2
Word 5
word 50
Word 3
Word 6

By using this approach, Word 48, Word 49, and Word 50 are no longer needed in our dictionary. By eliminating them from our dictionary, we have:

Our Dictionary
Word 1
Word 2
Word 3
Word 4
Word 5
Word 6
Word 7
Word 8
…
Word 47

This approach further reduces the size of our dictionary. As we can see, we start with 70 words, now we are down to 47.

Now, let's apply the approach from Elimination Method 3. From the approach number 3, we have learned that if a word exists in our dictionary and it is confused or caused a lot of confusion, it can then be replaced by another word. From our dictionary, we have:

Our Dictionary
Word 1
Word 2
Word 3
Word 4
Word 5
Word 6
Word 7
Word 8
…
Word 47

Let's assume that the usage of Word 46 and Word 47 have caused a lot of confusion, they can then be removed from our dictionary. By removing them, we further reduced the size of our dictionary as shown below.

Our Dictionary
Word 1
Word 2
Word 3
Word 4
Word 5
Word 6
Word 7
Word 8
…
Word 45

The way to look at it, when we use those two words, they make people confused or create ambiguity in our communication. Since we already have words in our dictionary that can be used to remove that confusion, we simply remove those two words and use the existing words. Doing so makes our communication more portable and further reduces the size of our dictionary.

Another way to look at it, since communication about Entity 1 points to Entity 1. It can be viewed as a group of sentences which is a collection of words, where all those words belong to the dictionary. Now, since Word 46 and Word 47 create confusion in the communication about Entity 1, using those two words does not enable communication about Entity 1 to point to Entity 1. In this case, those two words can simply be removed from communication about Entity 1. When we do that, we simply remove them from our dictionary which makes it more portable.

From the approach from Elimination Method 4, we have learned that: If a word or the definition of a word is already defined or implemented in another word or a group of words, then the usage of that word can be dropped.

From our dictionary, we have:

Our Dictionary
Word 1
Word 2
Word 3
Word 4
Word 5
Word 6
Word 7
Word 8
…
Word 45

Let's assume that Word 43, Word 44, and Word 45 are already defined in other words, where those words have been misused. But when the other words are used, there is no problem. In this case, we can simply remove them from our dictionary to prevent the misuse. Removing them from our dictionary prevents the misuse. It also reduces the size of our dictionary and makes our communication more portable.

Our Dictionary
Word 1
Word 2
Word 3
Word 4
Word 5
Word 6
Word 7
Word 8
…
Word 42

Now, let's use the approach from Elimination Method 5. If the structure of a word is already included in another word or a combination of words, then that word can be dropped; especially if that word has been misused, misinterpreted or misunderstood.

Our Dictionary
Word 1
Word 2
Word 3
Word 4
Word 5
Word 6
Word 7
Word 8
…
Word 42

From the approach above, let's assume that the structure of Word 41 and Word 42 is already implemented in Word 2 and Word 3 where Word 41 and Word 42 have been misused. In this case, we can simply drop them in our dictionary. By dropping them from our dictionary, we have:

Our Dictionary
Word 1
Word 2
Word 3
Word 4
Word 5
Word 6
Word 7
Word 8
…
Word 40

As shown above, since the two words have been misused and the structures of both words are already implemented in other words, there is no need to use them since they have been misused. In this case, we can simply remove them from our dictionary and use the existing words that have not been misused. Doing so reduces the size of our dictionary and also makes it more portable.

Now, let's look at the approach of Elimination Method 7: If a word exists and does not identify an actual entity, then that word can be removed from our dictionary. From our dictionary we have:

Our Dictionary
Word 1
Word 2
Word 3
Word 4
Word 5
Word 6
Word 7
Word 8
…
Word 40

Let's assume that Word 38, Word 39, and Word 40 exist in our dictionary but do not point or identify any entity. For example, Word 38 does not identify Entity 38, Word 39 does not identify Entity 39 and Word 40 does not identify Entity 40.

As explained above, those words do not point to actual entities. In this case, we can simply remove them from our dictionary because they serve us no purpose. They are simply using more space in our dictionary to make it less portable. By removing them, our dictionary becomes more compact and more portable.

Our Dictionary
Word 1
Word 2
Word 3
Word 4
Word 5
Word 6
Word 7
Word 8
…
Word 37

Now, let's take a look at the approach in Elimination Method 8. If the structure of a word does not exist or does not exist in another word or combination of other words, that word can be removed from our dictionary.

Our Dictionary
Word 1
Word 2
Word 3
Word 4
Word 5
Word 6
Word 7
Word 8
…
Word 37

Let's assume that from our dictionary above, we have Word 36 and Word 37. Those two words should point to two entities. The fact that the structures of those two words do not exist or do not exist in a combination of words, they simply serve no purpose in our dictionary. We can also say that those words have no structure, because they don't point to any entity. They serve us no purpose because we cannot use them in our communication or communicate properly with them since they identify no entity. In this case, we can simply drop them from our dictionary. By removing them from our dictionary, that makes our dictionary more compact and portable.

Our Dictionary
Word 1
Word 2
Word 3
Word 4
Word 5
Word 6
Word 7
Word 8
…
Word 35

Let's take a look at the approach from Elimination Method 9. If the usage of a word develops problems or may develop problems, where the solution is another word or the opposite word, that word can be removed or replaced by the opposite word.

We have the following words in our dictionary:

Our Dictionary
Word 1
Word 2
Word 3
Word 4
Word 5
Word 6
Word 7
Word 8
…
Word 35

If the usage of Word 35 develops problems or Word 34 is viewed as the solution for that problem. In this case, Word 35 can be dropped from our dictionary and use Word 34 instead, which is the solution of the problem. The way to look at it, a problem is developed because of the usage of a word; the opposite word which is viewed as the solution can be used instead. For instance, Word 34 points to Entity 34 where Entity 34 is viewed as the solution entity for the identified problem. Now, Word 35 points to Entity 35, but Entity 35 only exists when Word 35 is used. In this case, it makes sense for us to drop Word 35 from our dictionary to prevent the development of that problem. In other words, the problem only exists when the word is used. To solve that problem, we can simply drop that word from our dictionary and use the solution word instead. When we do that, we further reduce the size of our dictionary and make our communication more portable.

Our Dictionary
Word 1
Word 2
Word 3
Word 4
Word 5
Word 6
Word 7
Word 8
…
Word 34

Now, let's look at the approach of Elimination Method 10. If a word exists where that word was intended to solve a problem, then it failed. If that problem solution exists in another word or in combination of words or structure in other word(s), then that word can be dropped from our dictionary.

In our dictionary we have:

Our Dictionary
Word 1
Word 2
Word 3
Word 4
Word 5
Word 6
Word 7
Word 8
…
Word 34

If Word 34 exists in our dictionary where it was intended to solve a problem, then it failed. If that problem solution exists in Word 33 or in combination of Word 32 and Word 33 or in the structure of any of them, then we can drop Word 34 and use Word 33 or the combination of Word 32 and Word 33. The way to look at it, if that word is supposed to be the solution of a problem, but failed to solve that problem, then another word that is viewed as the solution for the actual problem can be used instead. In this case, we can simply drop that word from our dictionary. Another way to look at it, a problem is identified where Word 34 is supposed to point to Entity 34 which is viewed as the solution for the problem. But Entity 34 is not the actual solution for that problem, because it fails to solve it, while Word 33 exists in the form of Word 33 points to Entity 33 where Entity 33 is viewed as the solution for the actual problem. In this case, there is no need in our dictionary for Word 34. Another way to look at it,

Word 33  point to→  Entity 33
Word 34  not point to→  Entity 33

In this case, we simply remove Word 34 from our dictionary, because it does not point to an actual entity. Now since the word that intended to solve the problem fails, it does not point to an actual entity or an actual solution. The actual word that solves the problem is the one that points to the actual solution for that problem. In this case, the intended word can be removed from our dictionary. When we do that, we further reduce the size of our dictionary and make our communication more portable.

Our Dictionary
Word 1
Word 2
Word 3
Word 4
Word 5
Word 6
Word 7
Word 8
…
Word 33

Let's look at the approach of Elimination Method 11. If a word exists in the dictionary and it is misinterpreted and misunderstood, it can then be replaced by an existing word that is well understood and well interpreted.

Assume that in our dictionary we have:

Our Dictionary
Word 1
Word 2
Word 3
Word 4
Word 5
Word 6
Word 7
Word 8
…
Word 33

Now, if Word 32 and Word 33 have been misinterpreted and misunderstood where Word 30 and Word 31 are well understood and well interpreted, then we can drop Word 32 and Word 33 in our dictionary and use Word 30 and Word 31. The way to look at it:

Word 30  point to→  Entity 30
Word 31  point to→  Entity 31

But when we use ŵ32 and ŵ33 in our communication, they are viewed in the form of:

Word 32  does not point to→  Entity 30
Word 33  does not point to→  Entity 31

The way to look at it, those words supposed to point to the same entities. But when they are used, they don't point to the same entities, because they have been misunderstood and misinterpreted. Therefore, they can be dropped from our dictionary and use the existing words in our dictionary that are well understood and well interpreted. As pointed out above, those words still point to the same entity. When we do that, we further reduce the size of our dictionary and make our communication more portable.

Our Dictionary
Word 1
Word 2
Word 3
Word 4
Word 5
Word 6
Word 7
Word 8
…
Word 31

From the approach of Elimination Method 12, we have: If a word exists in our dictionary and it identifies wrong entity, it can then be removed from our dictionary.

From our dictionary we have:

Our Dictionary
Word 1
Word 2
Word 3
Word 4
Word 5
Word 6
Word 7
Word 8
…
Word 31

Let's assume that Word 31 identifies wrong entity, in this case we have:

Word 30  point to→  Entity 30      but      Word 31  wrongly identified→  Entity 30

From above, it shows that Word 30 identifies Entity 30, but Word 31 wrongly identifies Entity 30. This is the same as saying that an actual word points to an actual entity. Another word wrongly points to the actual entity. In this case, we can remove the other word from our dictionary since we already have a word that points to the actual entity. When we do that, we further reduce the size of our dictionary and make our communication more portable.

Our Dictionary
Word 1
Word 2
Word 3
Word 4
Word 5
Word 6
Word 7
Word 8
…
Word 30

Now, let's take a look at the approach of Elimination Method 13. If a word refers to a group where that word has been misunderstood, use the actual word in the group rather than the word itself.

In our dictionary we have:

Our Dictionary
Word 1
Word 2
Word 3
Word 4
Word 5
Word 6
Word 7
Word 8
…
Word 30

If Word 30 refers to a group of words and Word 30 has been misunderstood or misinterpreted, we can use a specific word in the group rather than using Word 30. Now, if Word 30 only exists in our dictionary for that purpose, we can simply drop it from our dictionary. When we do that, that further reduces the size of our dictionary and make our communication more portable.

Our Dictionary
Word 1
Word 2
Word 3
Word 4
Word 5
Word 6
Word 7
Word 8
…
Word 29

Now, we have reduced the size of our dictionary by applying all the approaches identified from the Elimination Methods 1–14. After doing so, we have reduced the size of our dictionary to 29 as shown in the table above.

Now, we have only 29 words in our dictionary. Let's assume that after applying all the techniques above, we have identified 4 words in our dictionary that do not identify actual entities. In other words, using visual aspect of communication, there are 4 words in our dictionary that do not identify any entity. Those 4 words are: Word 26, Word 27, Word 28, and Word 29. The way to look at it, the 4 words identified here are in the dictionary, but they do not identify any entity, for example we have:

Word 25  point to→  Entity 25
Word 26  not point to→  Entity 26
Word 27  not point to→  Entity 27
Word 28  not point to→  Entity 28
Word 29  not point to→  Entity 29

From above, we can see that Word 26, Word 27, Word 28, and Word 29 point nowhere. While the other words in our dictionary point to actual entities, the 4 words identified do not point to actual entities. They simply occupy more space in our dictionary. By removing them from our dictionary, we simply shrink the size of our dictionary to make it more compact and portable. Removing them from our dictionary simply reduces the size of our dictionary to just 25 words as shown below.

Our Dictionary
Word 1
Word 2
Word 3
Word 4
Word 5
Word 6
Word 7
Word 8
…
Word 25

As we can see, we start at 70 words. By removing all negative words from our dictionary, we reduce it to 50 words. By applying all the techniques identified, we further reduce our dictionary to 25 words. In this case, we decrease the size of our dictionary to about a third.

Some other approaches that are good to know which may not further reduce the size of our dictionary, but will improve our communication. If Word 1 and Word 2 does not point to Entity 1, then we use Word 1 to communicate about Entity 1 instead of Entity 2.

If the combination of Word 1 and Word 2 do not point to an entity, then we do not use it in our communication. This is the same as saying that if a term or an expression exists and it does not point to an actual entity, then we cannot use it in our communication.

Explore More in Natural Dictionary

Practice word elimination and explore the full dictionary in our interactive app.

Open Natural Dictionary App